2008 Harley Fat Boy, detachable windshield, detachable saddle bags, detachable backrest and luggage rack, Cycle Shack exhaust, Sundowner seat, plus stock seat, highway pegs, lots of chrome add-ons. Always garage kept. Extended Warranty until June 2013. I am the original owner. Beautiful bike! Perfect condition! Not a scratch! $15,000 or Best Offer! Would also consider trading my Fat Boy plus cash for red 2009 Harley Street Glide 309-208-2827

FLSTF Fat Boy features:

Rigid-mount, 1584cc Twin Cam 96B balanced engine

6-speed Cruise Drive transmission

Black powder-coated engine with chrome covers

Chrome Over/Under Shotgun exhaust

Chrome oil tank

200 mm-17 rear / 140 mm-17 front tire

Silver Bullet Hole Disc Cast Aluminum 17-inch wheels

Chopped FL rear fender

Two-up seat with bullet laced valence

1.25-inch internally wired handlebar with Bare Knuckle risers

Five-gallon Fat Bob fuel tank with laced bullet strap

Chrome front fork nacelle

Full-length floorboards with heel/toe shift lever

32-degree FL front forks and custom front fender

Large chrome headlight

SPECIFICATIONS:

2008 harley-davidson® SPECIFICATIONS1 softail® FLSTF Fat Boy®

DIMENSIONS

Length 94.30 in. (2395.22 mm)

Overall Width 39.20 in. (995.68 mm)

Overall Height 44.50 in. (1130.30 mm)

Seat Height:

• Laden2 25.40 in. (645.16 mm)

• Unladen 27.50 in. (698.50 mm)

Ground Clearance 5.10 in. (129.54 mm)

Rake (steering head) 32°

Fork Angle 32°

Trail 5.80 in. (147.32 mm)

Wheelbase 64.50 in. (1638.30 mm)

Tires (Dunlop® Harley-Davidson® Series, radial blackwall):

• Front – D407F 140/75R17 67V

• Rear – D407 200/55R17 78V

Fuel Capacity (warning light at approximately 1 gal.) 5 gal. (18.93 L)

Oil Capacity (w/filter) 3 qts. (2.84 L)

Transmission Capacity 1 qts. (0.95 L)

Primary Chain Case Capacity3 1 qts. (0.95 L)

Weight:

• As Shipped 694 lbs. (314.79 kg)

• In Running Order 714 lbs. (323.86 kg)

• Gross Vehicle Weight Rating 1160 lbs. (526.17 kg)

Gross Axle Weight Rating:

• Front 430 lbs. (195.04 kg)

• Rear 730 lbs. (331.12 kg)

ENGINE

Engine4 Air-cooled, Twim Cam 96B™

Valves Pushrod-operated, overhead valves with hydraulic,

self-adjusting lifters; two valves per cylinder

Bore x Stroke 3.75 in. (95.25 mm) x 4.38 in. (111.25 mm)

Displacement4 96 cu. in. (1584 cc)

Compression Ratio 9.2:1

Fuel System5 Electronic Sequential Port Fuel Injection (ESPFI)

Air Cleaner Paper, washable

Lubrication System Pressurized, dry-sump

DRIVETRAIN

Primary Drive Chain, 34/46 ratio

Final Drive6 Belt, 32/66 ratio

Clutch 9-plate, wet

Transmission 6-Speed Cruise Drive™

Gear Ratios (overall): U.S. HDI JPN

1st 9.312 9.312 9.030

2nd 6.421 6.421 6.226

3rd 4.774 4.774 4.630

4th 3.926 3.926 3.807

5th 3.279 3.279 3.179

6th 2.790 2.790 2.706

CHASIS

Frame Mild steel, tubular frame; rectangular section backbone; stamped,

cast, and forged junctions; forged fender supports; MIG welded

Swing Arm Mild steel, round tube sections, forged junctions; MIG welded

Front Forks 41.30 mm telescopic, “beer can” covers

Rear Shocks Hidden, horizontal-mounted, coil-over

Wheels7: Silver, Bullet Hole Disc Cast Aluminum

• Front 17 in. x 3.50 in. (431.80 mm x 88.90 mm)

• Rear 17 in. x 6 in. (431.80 mm x 152.40 mm)

Brakes:

• Caliper Type 4-piston front and 2-piston rear

• Rotor Type (diameter x width): Patented, uniform expansion rotors

• Front 11.50 in. x .20 in. (292.10 mm x 5.08 mm)

• Rear 11.50 in. x .23 in. (292.10 mm x 5.84 mm)

Suspension Travel:

• Front Wheel 5.10 in. (129.54 mm)

• Rear Wheel 4.30 in. (109.22 mm)

PERFORMANCE

Engine Torque8 (per SAE J1349):

• North America 89.80 ft. lbs. @ 2750 rpm (121.77 NM @ 2750 rpm)

• World 87.50 ft. lbs. @ 3300 rpm (118.65 NM @ 3300 rpm)

• Japan 80.20 ft. lbs. @ 3000 rpm (108.75 NM @ 3000 rpm)

Lean Angle (per SAE J1168): Right: 30° Left: 28°

Fuel Economy9(EPA urban/highway test): 35/54 mpg (6.72/4.36 L /100 km)

ELECTRIC

Battery Sealed, maintenance-free, 12V, 19-amp/hour, 270 cca

(per Battery Council International Rating)

Charging Three-Phase, 38-amp system

(439W @ 13V, 2000 rpm, 489W max power @ 13V)

Starting 1.2 kW electric with solenoid shift starter motor engagement

Lights (as per country regulation):

• Headlamp (quartz halogen) 55-watt low beam, 60-watt high beam

• Tail/Stop Lights 8W/28W (5W/21W)

• Turn Signal Lights 28W (21W) self-canceling

• Indicator Lamps High beam, neutral, low oil pressure, turn signals,

engine diagnostics, 6-speed, low fuel warnings

STYLING/CONVENIENCE

Engine Trim Black powder-coated engine with chrome treatment covers

Exhaust System Chrome, over/under shotgun exhaust with dual mufflers

Fenders and Supports

• Front Rolled-back custom front fender

• Rear Full coverage fender with chrome supports

Foot Supports and Controls

• Rider Full-length footboards with heel/toe shift levers

• Passenger Standard footpegs

Handlebar Style Chrome, with 1.25 in. diameter internally wired bar

Seat Type and Style Two-piece, two-up Softail® classic removable seat pillion

Fork Lock Common with ignition key

Hazard Warning Integrated into turn signal controls